Erase Machine Marks in Seconds. Reveal Perfect Joints.

Product Introduction

“You've been there. The table saw has done its job, the router has plowed the groove, and now you're staring at a dado that should be ready for glue. But it's not. The bottom is ridged with machine marks. The depth is uneven—a fraction of a millimeter too shallow at one end, too deep at the other. You test-fit the mating piece, and it rocks. It gaps. It's just not right.

So you reach for sandpaper. You fold it, you press it into the corner, you work it back and forth for ten minutes. The ridges soften, but now the bottom is wavy. The fit is better, but ‘better' isn't what you were aiming for. You wanted perfect.

Now imagine a different tool. You set it over the groove—the wide, flat sole references the surrounding surface, so the blade can't cut deeper than you set it. You twist the brass knob to lower the blade by a hair. You push. A thin, translucent shaving curls up through the blade slot. The bottom of the groove is instantly flat, smooth, and exactly the depth you intended. The mating piece drops in with a soft, friction‑fit ‘thunk' that feels like a handshake.

That's what this precision router plane does. It doesn't cut new joinery—it perfects what your machines started. The blade is M2 High‑Speed Steel, ground square and set bevel‑down at 50 degrees. It cuts clean, holds an edge through project after project, and when it finally needs sharpening, you sharpen it like a chisel—flat on the stone, no jigs, no curved bevels to maintain. The maple handles are shaped to fit your hands whether you're pushing, pulling, or working from an awkward angle. The brass knobs adjust with a satisfying, precise feel.

And the included fence? It guides the plane along the edge of a board for perfectly straight rebates, mounting on either side with low‑profile screws that won't scratch your work. This isn't a tool you use once and forget. It's the tool you reach for every time a joint matters—which, in woodworking, is every time.”

Product Features

⚡ Wide, Flat Sole: It Can't Cut Deeper Than Perfect
“The sole references the surface around the groove. The blade only cuts what sticks up. Geometry does the thinking.”
“The sole measures 100mm by 183mm—wide enough to bridge across most dadoes and grooves without tipping in. Because it rides on the finished surface surrounding the cut, the blade can only reach down to the depth you set. It physically cannot dig in, gouge, or create a dip. You set the depth once, and every pass after that is identical. This is the feature that turns a freehand cleanup tool into a precision instrument.”
🦶 M2 HSS Straight Blade: Sharpens Like a Chisel, Lasts Like a Premium Plane Iron
“No curved bevels. No specialty jigs. Just a flat blade that sharpens on your regular stones.”
“The blade is a straight, square‑section piece of M2 High‑Speed Steel, set bevel‑down at 50 degrees. M2 holds its edge significantly longer than standard high‑carbon steel—you'll sharpen less and cut more. And when you do need to sharpen, you treat it exactly like a bench chisel: flat back, bevel on the stone. No L‑shaped blades, no curved profiles, no buying a dedicated honing guide. This is a blade designed by someone who sharpens their own tools.”
🔩 Included Fence: Straight Rebates, Guided and Predictable
“The fence turns a freehand tool into a guided system. Rebates follow the edge, every time.”
“The included fence mounts to either side of the body with low‑profile screws that sit flush—nothing protrudes to scratch your workpiece. Adjust it from above without flipping the tool over. Once set, the fence rides the board edge and the plane cuts a perfectly straight rebate, parallel to the reference face. No clamping a separate straightedge. No walking the cut off‑line. Just a clean, consistent channel, exactly where you intended it.”
🛡️ Maple Handles + Brass Knobs: Comfort That Lets You Focus on the Cut
“Woodworking is tactile. Your tools should feel as good as the work you produce.”
“The handles are turned from hardwood maple—warm to the touch, shaped to fit a natural grip whether you're pushing forward, pulling back, or working across your body. The knurled brass adjustment knobs turn with smooth, deliberate resistance and lock securely. At 1150 grams, the tool has enough mass to glide steadily without being heavy enough to cause fatigue. Every material choice is deliberate: wood where your hands touch, brass where precision matters, steel where the cutting happens.”

Product Specifications

• Sole Dimensions：100mm × 183mm (approx. 4″ × 7″)
  
• Blade Steel：M2 High‑Speed Steel (HSS)
  
• Blade Bevel Angle：Set bevel‑down at 50°
  
• Blade Width：12.7mm (1/2″)
  
• Weight：1150g (approx. 2.5 lbs)
  
• Handles：Comfortable hardwood maple
  
• Adjustment Knobs：Knurled brass
  
• Fence Compatibility：Left and right mounting

Your Precision Router Plane Includes:

• 1 × Large Router Plane (12.7mm / 1/2″ M2 HSS blade installed)
  
• 1 × Fence with Mounting Bracket & Low‑Profile Screws
  
• 1 × Owner's Manual 

🎯“Stop sanding uneven grooves and fighting with finicky setups.
Grab the precision router plane that gives you flat, clean, professional joints in one pass. Finally enjoy joinery that fits perfectly — every time.”